Resources
Resources
View Our Resources
PREP IT
CITRA CLEAN – Super-concentrated heavy duty citrus cleaner/degreaser/wax stripper
CITRA STRIP – Citrus-based coating remover
GLUE REMOVER – Citrus-based carpet glue remover
QUICK STRIP – Solvent-based sealer and coating remover
SUPER PREP – Pre-Stain prep that cleans and profiles the concrete surface
COLOR IT
INTEGRAL COLOR – Economical pre-measured pigment for integrally coloring ready mixed concrete.
ANTIQUE RELEASE – Finely ground colored powder used as a stamp release agent to create a soft accent color in finished concrete.
OLD WORLD ACID STAIN – Concentrated, acid-based stains that react with the concrete and penetrate deep into the surface to produce the rich, vibrant colors of nature’s minerals with the strength and permanence of modern concrete.
OLD WORLD WB STAIN – Polymer-based stains that penetrate into concrete surfaces to produce vibrant, long-lasting colors that enhance any concrete surface.
PERMA-TIQUE – Proprietary blend of powders that are mixed with water to add color and visual interest to stamped concrete surfaces.
WB URETHANE COLORANT – Colorant specifically designed as a coloring agent for water based urethane.
PROTECT IT
40% MOISTURE CURED POLYURETHANE -Single component moisture cured polyurethane (HDI based) floor coating/sealer that exhibits superior characteristics for abrasion resistance and chemical resistance. 40% solids, UV stable.
65% MOISTURE CURED POLYURETHANE – Single component moisture cured polyurethane (HDI based) floor coating/sealer that exhibits superior characteristics for abrasion resistance and chemical resistance. 65% solids, UV stable.
100% UV EPOXY – Two component, 100% solids epoxy seal coat which incorporates UV resistance additives that can be used either as a coating or filled with paint chips, marble chips and colored sand mixtures to provide an infinite array of color schemes or patterns.
CLEAR GUARD – Enhances concrete color and provides a glossy surface protected from stains and provides a chemical resistance finish. Can be applied before concrete has fully cured.
HIGH PERFORMANCE POLYURETHANE -Two-component polyester/aliphatic polyurethane floor sealer that exhibits excellent characteristics for abrasion resistance, chemical resistance, flexibility, weathering and UV stability.
LITHOSHINE – Water-based lithium solution designed to densify cement and concrete substrates.
LITHOGUARD -Surface conditioner and stain guard applied before the final polishing step to help maintain a glossy stain resistant finish.
OLD WORLD WB SEALER – A tough non-yellowing acrylic sealer used to seal and protect stained floors. This sealer is used with our Old World WB Stain.
SILANE SILOXANE 20% – Provides excellent water repellency to reduce cracking, spalling, freeze-thaw damage, chemical degradation, biological growth, efflorescence, and dirt pickup.
STONE SHIELD – Applied to stone and concrete surfaces to prevent water penetration and reduce the effects of atmospheric deposits and soil.
VOC COMPLIANT HIGH PERFORMANCE POLYURETHANE – two-component coating that exhibits excellent characteristics for abrasion resistance, chemical resistance, flexibility, weathering, and UV stability.
WB EPOXY -Two component water based epoxy coating that exhibits excellent characteristics that rival solvent based products. Chemical resistance, abrasion resistance, and substrate penetration.
MAINTAIN IT
SMOOTH FINISH -High gloss, non-yellowing acrylic polish for use on most types of sealed concrete floors and countertops.
STAMPING AND OVERLAY PRODUCTS
Overlay materials:
TUFF BOND – Acrylic copolymere emulsion designed specifically to blend with cementitious mixtures to greatly increase the bond strength, flexural and tension strength.
TOUGH STUFF SPRAY MIX – A two-component overlay material used to resurface concrete. Sets rock hard; resists water penetration and provides a durable and consistently textured surface.POLY 600 – A concentrated, high solids polymer modifier used to add strength and flexibility to cement mixes such as concrete patching, overlays, and microtopping.
Stamping release:
ULTRA RELEASE – A low toxicity, safer liquid release agent that evaporates completely, leaving no residue.
Floor Maintenance
Floor Maintenance:
Color Palettes
